Friday, October 10, 2008

TECHNICS SL1210MK5 Direct Drive Turntable

TECHNICS SL1210MK5 Direct Drive Turntable

This listing is for a brand new and factory sealed TECHNICS SL1210MK5 Direct Drive Turntable. There is a 1 year warranty from .Details * Built-in anti-skate adjustment up to 6g * Arm-end scale for quick weight setting * Molded aluminum diecast cabinet and heavy rubber base material help absorb unwanted vibrations from the dance floor * Professional Technics slipmat * Highly sensitive low-mass tone arm with gimbaled suspension * Includes removable hinge-free dust cover (not shown) * Size: 17-13/16"w x 6-3/8"h x 13-7/8"h. 26.4 lbs. * Brand new & factory sealed

B&C 18TBX100 2000 Watt Super Power Woofer

B&C 18TBX100 2000 Watt Super Power Woofer

This listing is for a brand new and factory sealed BandC 18TBX100 2000 Watt Super Power Woofer. There is a 1 year warranty on this item.Details * Double silicone spider w/optimized compliance * Ventilated voice coil gap for reduced power compression * Nominal Diameter 460 (18) mm (in) * Nominal Impedance (1) 8 Ohm * Minimum Impedence 6.2 Ohm * Nominal Power Handling (2) 1000 W * Continuous Power Handling (3) 2000 W * Sensitivity (1W/1m) (4) 97 dB * Frequency Range 35 - 1000 Hz * Voice Coil Diameter 100 (4) mm (in) * Winding Material Copper * Former Material Glass Fibre * Winding Depth 25 (1) mm (in) * Magnetic Gap Depth 12 (1/2) mm (in) * Flux Density 1.1 T * Thiele & Small Parameters * Fs 34 Hz * Re 5.1 Ohm * Qes 0.37 * Qms 7.2 * Qts 0.35 * Vas 212 (7.5) dm3 (ft3) * Sd 1210 (187.6) cm2 (in2) * Eta Zero 2.2 % * Xmax +/- 9 mm * Xvar +/- 11 mm * Mms 209 g * Bl 25.5 Txm * Le 1.6 mH Mounting & Shipping Info * Overall Diameter 460 mm (18 in) * Bolt Circle Diameter 440 mm (17.3 in) * Baffle Cutout Diameter 422 mm (16.6 in) * Depth 209 mm (8.2 in) * Flange & Gasket Thickness 16 mm (5/8 in) * Net Weight 13 kg (28.6 lb) * Shipping Weight 14.4 kg (31.7 lb) * Shipping Box 500x500x250 mm; (19.7x19.7x9.8 in) (1) For different impedances, please ask. (2) 2 hours test made w/continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. (3) Power on Continuous Program is defined as 3 dB greater than the Nominal rating. (4) Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. * Brand new & factory sealed

NUMARK CDMIX1 CD Player and Mixer System

NUMARK CDMIX1 CD Player and Mixer System

This listing is for a brand new and factory sealed NUMARK CDMIX1 CD Player and Mixer System. There is a 1 year warranty on this item from .Details * 3 search speeds * Large back lit LCD Display * Track sequence programming * Time button with elapse and remain time bar * Single/Continuous modes * Pitch percentage display * +/- 12% pitch adjustment * Auto dead space elimination * Ability to autostart player with use of the crossfader * BPM counter * External input for 2 Phono or 2 Line inputs * Master balanced/unbalanced and record output * Direct input for onboard CD units * Input for External Microphone with independent gain control * Crossfader to blend between 2 Channels and control Auto start of the CD units * 3-band Equalizer for master output * Dual Band, 12-segment LED output display * Fader CD Start button * Headphone output for 1/4 in. and 1/8 in. style plugs with the ability to cue any channel * 12VDC power input to allow car battery usage * 16-bit linear/channel, 3 beam laser * Oversampling rate: 8 times * Short access time (Play next track): Less than 1.7 seconds * Long access time (Track 1 ->Track 20): Less than 3 seconds * Start Time: less than 0.3 seconds * Pitch control range: +/-12% * Pitch bend: +/-16% * Frequency Response * CD: 20 - 20KHz +1,-2dB * LINE 20: - 20KHz +1,-1.5dB * PHONO 20 - 20KHz +2,-2.5dB/RIAA * MIC 33 - 15KHz +1,/-3dB * S/N Ratio: (IEC-A Weighted) * CD/LINE: More than 85dB * PHONO: More than 75dB * MIC: More than 70dB * Total Harmonic Distortion * CD/LINE: Less than 0.05%( 20KHz LPF) * PHONO: Less than 0.12% * MIC: Less than 0.12% * PHONES (32 0HM) Less than 0.25% * Crosstalk * CD: More than 60 dB AT 1KHz * Line/Phono: More than 55 dB AT 1KHz * Equalizer * LOW: +/- 12 dB (100Hz) * MID: +/- 12 dB (1KHz) * HI: +/- 11.5 dB (10KHz) * Power Requirements DC 12V, 2.5A * Dimensions: 17 1/2"(W) x 10"(D) x 6 3/16"(H); 445mm(W) x 255mm(D) x 157mm(H) * Weight: 11.5lbs.; 5.2Kgs * Brand new & factory seale

AMERICAN INTERNATIONAL 82 & Up Gm Multi Kit

AMERICAN INTERNATIONAL 82 & Up Gm Multi Kit

Technical Details

* For 1974+ GMs
* Includes 1/2" and 1" nose extensions with rounded corners

XM 10" MIRROR MOUNT

XM 10  MIRROR MOUNT

TRAM 2315 XM SATELLITE RADIO 10" MIRROR-MOUNT KIT COMPATIBLE WITH ALL XM SATELLITE RADIOS; COMPACT, 10? TALL; FEATURES 3-WAY STAINLESS STEEL MOUNT; INCLUDES RIGHT-ANGLE SMB FEMALE CONNECTOR and 10-FT HEAVY-DUTY THICK RG-174 COAXIAL CABLE

OXX DIGITAL ALTO Wi-Fi Internet Radio Alarm Clock Streaming Music Player - Color Black

OXX DIGITAL ALTO Wi-Fi Internet Radio Alarm Clock Streaming Music Player - Color Black

OXX Digital brings the world of Internet radio into your home. We provide access to an extremely diverse range of Internet radio stations from around the world, with broadcasts from nearly every country on the planet. We provide both live, worldwide podcasts and on-demand "listen again" services such as those operated by BBC. Oxx supports RealAudio®, Microsoft Windows MediaTM Audio, MP3, AAC (unprotected), AU, WAV, AIFF and Ogg Vorbis formats. In the OXX Digital Wireless Music Centre today you can browse more than 6500 internet radio stations by Genre or by Location  no subscription charges and no international boundaries. You can also stream your favourite music files from your PC or Apple Mac to anywhere in your home, office or wherever you can access a WI-FI connection.

Antenna Specialists XM20-CP Roof-mount XM Satellite Antenna

Antenna Specialists XM20-CP Roof-mount XM Satellite Antenna

The Antenna Specialists XM20-CP Roof-mount XM Satellite Antenna is the lowest profile antenna available for an XM radio. Measuring a mere 14-millimeters in height, it sports an aerodynamic shape and profile. The XM20 requires no drilling to mount; instead it uses a simple peel-and-stick adhesive for a quick, easy, and semi-permanent installation.

Gold Mining News